SPECIFICAITONS:
Power source:220V/AC~240V/AC
Power frequency: 50-60HZ
Time–delay: min: 8±3sec max: 7±2min
Detection angle: 360º
Ambient light: <3LUX-2000LUX
Working temperature: -20-40℃
Detection distance: 6m max(<24℃)
Rated load: 800W (incandescent lamp)
200W(energy-saving lamp)
Power consumption: 0.5W
Installation height: 2.2-4m
Detection motion speed: 0.6-1.5m/s
Working humidity: <93%RH
800W (100-130V/AC)
Power source:220V/AC~240V/AC
Power frequency: 50-60HZ
Time–delay: min: 8±3sec max: 7±2min
Detection angle: 360º
Ambient light: <3LUX-2000LUX
Working temperature: -20-40℃
Detection distance: 6m max(<24℃)
Rated load: 800W (incandescent lamp)
200W(energy-saving lamp)
Power consumption: 0.5W
Installation height: 2.2-4m
Detection motion speed: 0.6-1.5m/s
Working humidity: <93%RH
The product is the new saving-energy switch adopted the good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, sawing-energy and practical functions. Three detectors inside compose a wide range detection field, they utilize the infrared energy from human as control-signal source to start the load at once when human enter detection field. And they can identify day and night automatically. It is easy to install and used widely, possessing the power show and detecting show functions.
Connection:
1. Turn clockwise the plastic cover that is on the top of sensor and adjust time and LUX knob.
2.Loose the screws in the connection terminal,and then connect the power to connection terminal of sensor according to connection-wire diagram.
3. Fold the metal spring of the sensor upwards,until ther are in “I” position with sensor,and then put the sensor into the hole or installation box which is on the ceiling and has the similar size with the sensor.Releasing the spring,the sensor will be set in this installation position.
4.After finishing installing,turn on the power ang then test it.