CEILING SENSOR FL300

Power source: 110V/AC~130V/AC,220V/AC~240V/AC

Power frequency: 50-60HZ

Time–delay: min: 8±3sec max: 7±2min

Detection angle: 360º

Ambient light: <3LUX-daylight

Working temperature: -20-40℃

Detection distance: 8m max(<24℃)

Rated load: 1200W (220-240V/AC),800W (110V/AC)

Power consumption: 0.45W(static 0.1W)

Installation height: >3m

Detection motion speed: 0.6-1.5m/s

Working humidity: <93%RH

The product is the new saving-energy switch adopted the good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, sawing-energy and practical functions. Three detectors inside compose a wide range detection field, they utilize the infrared energy from human as control-signal source to start the load at once when human enter detection field. And they can identify day and night automatically. It is easy to install and used widely, possessing the power show and detecting show functions.

INSTALLATION: (see following diagram)

1. Switch off the power:

2.Push down LED according to the sketch map in packing, take down the top cover by anti-clockwise turn.

3.The sensor is fixed on the selected position with the inflated screw:

4. Connect the power and the load into the connection-wire column according to the sketch map.

5.Put the top cover on the sensor, turn it clockwise and you will hear “bong ”, so you can test it.

CONNECTION SKETCH (see the right figure)