CEILING SENSOR FL302

Power source:220V/AC~240V/AC

Power frequency: 50-60HZ

Time–delay: min: 10±3sec max: 7±2min

Detection angle: 360º

Ambient light: <3LUX-2000LUX

Working temperature: -10-40℃

Detection distance: 6m max(<24℃)

Rated load: 2000W (incandescent lamp)

1000W(energy-saving lamp)

Power consumption: 0.5W

Installation height: 2.2-4m

Detection motion speed: 0.6-1.5m/s

Working humidity: <93%RH

The product is the new saving-energy switch adopted the good sensitivity detector, integrated circuit and SMT. It gathers automatism, convenient safe, sawing-energy and practical functions. Three detectors inside compose a wide range detection field, they utilize the infrared energy from human as control-signal source to start the load at once when human enter detection field. And they can identify day and night automatically. It is easy to install and used widely, possessing the power show and detecting show functions.

Connection:

1.Please move the upper cover with anti-clockwise whirl as per the diagram on the right.

2.Connect the power and the load according to the connection-wire diagram.

3. Fix the bottom on the selecred position with the inflated screw.

4. Install back the upper cover on the sensor,then you could switch on the power and test it.

CONNECTION-WIRE DIAGRAM:

The wire come in and Out from the bottom

The wires come in and Out from the side