Two/Three Track Aluminium Sliding Windows with Mosquito Net Heat Insulated Glass

Aluminum Three Track Aluminum Sliding Windows Introduction:

Three track sliding window is a kind of sliding window with three pulley tracks. Generally, three or more windows are needed to form a three track sliding window. The opening mode of the three track sliding window is simple and convenient, and the cleaning is also convenient. Three track sliding window can open two-thirds of the space, so that indoor ventilation effect is better, indoor and outdoor air can be very good convection. Moreover, the three track sliding window has good sealing performance, dust and moisture are difficult to enter, and its sound and heat insulation effect is also very significant. Due to the installation of the sliding rail system, there is no sound when the three rail sliding window is pushed and pulled, and the switch is convenient. The three track sliding window also has strong permeability. It is installed with transparent glass, which can provide large area of natural lighting. It is especially suitable for installation on the windowsill.

1. Pay attention to the safety performance when purchasing the three track sliding window. The frame of the three track sliding window on the market is basically made of aluminum alloy. When purchasing the three track sliding window, we should carefully observe the aluminum alloy quality of the frame. If you can in the purchase, let the business take out its cross-section to see. In general, aluminum magnesium alloy profile frame most of the use of primary color, will not add coating. And some businesses will be shoddy, the surface of recycled aluminum painted to deceive consumers. Therefore, when you buy the three track sliding window, you must let the merchants show the section of the product profile, so as to better understand the quality of the frame.

2. When choosing the three track sliding window, be sure to look at the upper and lower pulleys. The upper pulley of the three track sliding window plays a guiding role, so it is installed in the upper part of the track. However, some consumers tend to ignore these problems when they buy. Some high quality upper pulley will have complex structure, and its inner bearing and aluminum block can make the pulley slide stably without noise. Some consumers also buy three track sliding windows, they will feel that the lighter the sliding window is, the better, in fact, it is not. Generally good three track sliding window has certain self weight when sliding, and there will be no vibration phenomenon when sliding.

Product Details:

Advantages:

Curved inner fan and pressing line design enhance the stereoscopic sense of vision,
The screen has the functions of anti-theft and anti mosquito

Patented anti falling products,
Patent design of high and low rail drop
Stainless steel track configuration, ensure that the track is not easy to damage; high load-bearing pulley, open and close smoothly
45 degree splicing of inner fan, simple and fast
Two point side lock is adopted to improve the air tightness of the front window
Standard child safety lock to ensure personal safety
Ergonomic armrest design, can put small potted plants, increase the ecological atmosphere
The lower fixed guardrail or open guardrail can be selected to highlight the beautiful effect of the whole window
5mm hollow glass as standard

Window Hardwares:

Common window hardware includes: inner horizontal opening and lower suspension hardware system, transmission mechanism handle, spinning handle, transmission locking device, multi-point locking device, hinge (hinge), middle suspension (vertical suspension) hinge (hinge), sliding support, support block, bolt, single point locking device, pulley, etc.
Hardware system of inner horizontal opening and lower suspension: it is a hardware system with functions of inner horizontal opening, lower suspension and locking by operating handle.
1. Handle for drive mechanism: drive drive locking device and multi-point locking device to realize the opening and closing of window sash.
2. Drive locking device: it is a rod-shaped drive device with locking points to control the locking and opening of window sashes, which can realize the multi-point locking function of casement windows and suspended windows.
3. Spinning handle: it is a device that can realize the function of opening, closing and locking the window by turning the handle.
4. Sliding support: it is used to connect the window frame and the window sash, support the window sash and realize the opening and closing.
5. Supporting block: a device that can fix the open window sash in a preset position.
6. Bolt: a device for positioning and locking the door and window.
7. Multipoint locking device: it is a device to realize multipoint locking function for sliding window.
8. Single point locking device: it is a device to realize single position locking of sliding doors and windows through operation.
9. Pulley: a device that can bear the weight of the window sash, transfer the gravity to the frame material, and make the window sash move back and forth along the track of the frame material through its own rolling under the action of external force.

Corporate Introduction:

KLUK Aluminum Windows and Doors System Co.,Ltd is high-end brands growth in Guangdong Yonglong Aluminum.Guangdong Yonglong Aluminum Co.,Ltd is located in Sanshui District,Foshan City,which was established in 1997.Yonglong is a large comprehensive profile enterprise with research,development,manufacture and sales of aluminum alloy profiles.
After years of development and precipitation, the group's business is mainly divided into four majors:'HONG YING' aluminum brand,'KLUK' high-end aluminum windows and doors system brand,building aluminum formwork and industrial aluminum profiles.We have passed ISO9001:2015 quality management system certification,ISO14001:2015 environmental management system certification.With abundant comprehensive strength and high quality service,the brand HONG YING has been well sold all over the country and exported to many countries and regions including South Asia,Europe,South America and so on.

KLUK is a systematic aluminum door and window brand integrating design and development of high-end aluminum alloy doors and windows, mold opening and production of profiles, formulation of processing technology standards, construction guidance, marketing and brand promotion services. The company introduces the world's top automatic production equipment, advanced surface treatment technology and high-precision inspection and testing equipment to realize informatization, standardization and standardization from manufacturing to process standard formulation and implementation, from sales service to order management, so as to comprehensively improve the efficiency of customer service, improve product delivery time and realize the optimization and integration of enterprise resources.

Corporate Advantages:

1.24 years' experience and advanced equipment

2.Customize: We can manufacture according to your size and shape of such aluminum profile;

3.Strong production capacity - 28 extrusion lines, 50,000TONS/Year

4.One Stop Service Specialized in mould, extrusion, anodizing, powder coating, wood grain and Processing;

5.Shortest Delivery , competitive prices and excellent service