1.Model: WE67K-160/3200
2. Appearance of the Machine
1 |
Nominal pressure |
1600 |
KN |
|
2 |
Bending width |
3200 |
mm | |
3 |
Distance between uprights |
2500 |
mm | |
4 | Stroke |
200 |
mm |
|
5 |
Max. Daylight |
475 |
mm |
|
6 |
Throat depth |
400 |
mm |
|
7 |
Working table length |
3200 |
mm |
|
8 |
Approaching speed |
120 |
mm/s | |
9 |
Bending speed |
10 |
mm/s |
|
10 |
Returning speed |
100 | mm/s |
|
11 | Main motor power |
11 |
KW | |
12 |
Oil pump |
25 | l/r |
|
13 |
Back gauge range |
600 |
mm |
|
14 |
Machine length | 3200 |
mm | |
15 |
Machine width |
1550 |
mm | Without front feeder |
16 |
Machine height | 2750 |
mm |
|
17 |
axis | Y1-Y2-X-R+V |
CNC |
▲ highly productive, accurate, and economical.
▲close loop proportional hydraulics for beam synchronization
▲BOSCH-REXROTH highly precise proportional valve to control accurate beam movement
▲High alloy back gauge, with high rigidity in light heavy
▲ accurate & fine beam position control by micro limit switch.
▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
▲ three speeds shit automatically
▲the current position and set position of the Y1, Y2,X,R are showed on the CNC controller LCD.
▲three types operation way: manual, semiautomatic andautomatic
▲CNC controlled mechanical pulling-rod anti-crowing device(V)
▲FAGOR light encoder to avoid the deflection bending
▲DA53T touch screen control system
▲liner motion bearingsand AC servo drive for accurate position up to 0.05 mm.
.....