WE67K-400/4000 CNC Press Brake
1.Model: WE67K-400/4000
2. Appearance of the Machine
--Parameter
| 1 |
Nominal pressure |
4000 |
KN |
|
| 2 | Bending width |
4000 |
mm |
|
| 3 |
Distance between uprights |
3100 |
mm |
|
| 4 |
Stroke |
250 | mm |
|
| 5 |
Max. Daylight |
520 |
mm |
|
| 6 |
Throat depth |
400 |
mm |
|
| 7 |
Working table length |
4000 |
mm |
|
| 8 |
Approaching speed |
100 |
mm/s |
|
| 9 |
Bending speed |
8 |
mm/s |
|
| 10 |
Returning speed |
80 |
mm/s |
|
| 11 |
Main motor power |
15 |
KW |
|
| 12 |
Oil pump |
25 |
l/r |
|
| 13 |
Back gauge range |
600 |
mm |
|
| 14 |
Machine length |
4100 |
mm |
|
| 15 |
Machine width |
2000 |
mm |
Without front feeder |
| 16 |
Machine height |
3430 |
mm |
|
| 17 | axis |
Y1-Y2-X+V |
CNC |
|
▲ highly productive, accurate, and economical.
▲close loop proportional hydraulics for beam synchronization
▲BOSCH-REXROTH highly precise proportional valve to control accurate beam movement
▲High alloy back gauge, with high rigidity in light heavy
▲ accurate & fine beam position control by micro limit switch.
▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
▲ three speeds shit automatically
▲the current position and set position of the Y1, Y2,X,R are showed on the CNC controller LCD.
▲three types operation way: manual, semiautomatic andautomatic
▲CNC controlled mechanical pulling-rod anti-crowing device(V)
▲FAGOR light encoder to avoid the deflection bending
▲DA53T touch screen control system
▲liner motion bearing sand AC servo drive for accurate position up to 0.05 mm.
Hydraulic system
punch & die
encoder
Automatic crowing table
.....
- 步骤1通过搜索关键词找到您感兴趣的产品
- 步骤2请点击 "查询 "或 "请求会面 "按钮联系供应商，否则，您也可以咨询我们的进口顾问。
- 步骤3确认您的电子邮件后，得到供应商的回复，或我们的贸易经理会尽快与您联系。
- 步骤4与中国供应商建立无语言障碍的会议
