1.Model: WE67K-1200/12000
2. Appearance of the Machine
--Parameter
1 |
Nominal pressure |
12000 |
KN |
|
2 |
Bending width |
12000 |
mm |
|
3 |
Distance between uprights |
9050 |
mm | |
4 |
Stroke |
400 |
mm |
|
5 |
Max. Daylight |
1120 |
mm |
|
6 |
Throat depth |
1200 |
mm |
|
7 | Working table length |
12000 |
mm | |
8 |
Approaching speed |
80 |
mm/s |
|
9 | Bending speed |
7 |
mm/s | |
10 |
Returning speed |
70 |
mm/s |
|
11 |
Main motor power |
2x45 |
KW |
|
12 |
Oil pump |
2x80 | l/r |
|
13 |
Back gauge range |
1000 |
mm |
|
14 |
Machine length |
12500 |
mm |
|
15 |
Machine width |
4000 |
mm |
without feeding table |
16 |
Machine height |
7180 |
mm | Over land |
17 |
axis |
Y1-Y2-X+V |
CNC |
--Features
▲ highly productive, accurate, and economical.
▲close loop proportional hydraulics for beam synchronization
▲BOSCH-REXROTH highly precise proportional valve to control accurate beam movement
▲High alloy back gauge, with high rigidity in light heavy
▲ accurate & fine beam position control by micro limit switch.
▲ hydraulic cylinder with twin type sealing low & high pressure and hard chrome.
▲ three speeds shit automatically
▲the current position and set position of the Y1, Y2,X,R are showed on the CNC controller LCD.
▲three types operation way: manual, semiautomatic andautomatic
▲CNC controlled mechanical pulling-rod anti-crowing device(V)
▲FAGOR light encoder to avoid the deflection bending
▲DA53T touch screen control system
▲liner motion bearingsand AC servo drive for accurate position up to 0.05 mm.
.....