Theaoson spray paint is composed of aerosol cans, aerosol valves, paints, and propellants. It is used in a wide range of applications: repair of paint enamels, molds, industrial machinery, buildings, steel structures, advertising, logos , graffiti and so on.

Features

High-gloss bright zinc                       

Color consistent with galvanized parts                            

Good atomization, easy to use

Application

It is suitable for color changing and anti-corrosion treatment of stainless steel, carbon steel, galvanized parts and other metal parts.

Instructions

Construction environment

Remark: the best material liquid temperature is +20 ºC, environment humidity less than 60%. If the temperature and humidity exceed the specified range, the temperature and humidity should be reworked within the suitable range.

Base material to prepare

Clean the oil, dust and water stains thoroughly before use, and polish or spray primer on the base material if necessary.

Instructions:

1.Before use, you must shake up, down, left, and right, and continue to shake the can for about 1 minute after hearing the sound of glass to ensure that the paint liquid is fully mixed and even.

2.15 ~ 30cm away from the surface of the object to be sprayed, press the nozzle with the index finger to spray uniformly back and forth.

3.When a small amount of remaining liquid cannot be sprayed, please rotate the nozzle 180 ° and spray again.

4.If spraying is not finished one time, put the can upside down before storage, press the nozzle for about three seconds, and clean the nozzle to prevent plugging.

Ending working

After spraying, it should be placed in a clean and ventilated environment for about 12 hours.

If it is not sprayed, the remaining material needs to be kept away from the light, and avoid being near fire sources.