1.Model: QC11Y-16X6000
2. Appearance of the Machine:
3. Parameter
Model(QC11Y) |
16x6000 |
Shearing thickness (mm) |
16 |
Shearing width (mm) |
6000 |
Cutting plate tensile strength N/mm² |
450 |
Shearing angle (°) |
0.5-2.5 |
Back gauge range (mm) |
20-1000 |
Blade length (mm) |
1025mm x 6 |
Throat depth (mm) |
100 |
Blade material |
Cr12MoV |
Main motor power (KW) |
37 |
Oil pump (L/min) |
80 |
Stroke (n/min) |
6-15 |
Length (mm) |
6880 |
Width (mm) |
2480 |
Height (mm) |
3000 |
--Features
▲ VariableR ake Angle Design Machines.
▲ Better cutting accuracy in thin sheets at lower rake angle.
▲ Higher cutting capacity at maximum rake angle.
▲ Low noise & smooth operation gives higher efficiency of operator.
▲ Less power consumption.
▲ Better safety for operator and machine.
▲ Front sheet support.
▲ Squaring arm with steel rule for front gauging.
▲ Hardened Transfer rollers + transfer balls mounted on table.
▲ Inner hold down cylinders.
▲ Cutting area illuminated for clear view of blades.
▲ Foot pedal with emergency stop
▲ Strokes can be controlled according different shearing length
▲ Four edge Cr12MoV Blade suitable to MS & SS.
▲ Multi-steps automatic back gauge program.
▲ Back gauge NC controlled
▲ Hardened & ground ball screw with linear motion bearings.
▲ Stroke counting on screen.
▲ Fast production on smaller jobs.
E21S NC controller
Rear Side
Back gauge
Valve
Cylinder
Blade
.....