QC11Y-16x2500 hydraulic guillotine shearing machine
1.Model: QC11Y-16X2500
2. Appearance of the Machine:
3. Parameter
| Model(QC11Y) |
16x2500 |
| Shearing thickness (mm) |
16 |
| Shearing width (mm) |
2500 |
| Cutting plate tensile strength N/mm² |
450 |
| Shearing angle (°) |
0.5-2.5 |
| Back gauge range (mm) |
20-600 |
| Blade length (mm) |
1300mm x 2 |
| Throat depth (mm) |
80 |
| Blade material |
Cr12MoV |
| Main motor power (KW) |
22 |
| Oil pump (L/min) |
50 |
| Stroke (n/min) |
9-20 |
| Length (mm) |
3320 |
| Width (mm) |
1940 |
| Height (mm) |
2200 |
--Features
▲ VariableR ake Angle Design Machines.
▲ Better cutting accuracy in thin sheets at lower rake angle.
▲ Higher cutting capacity at maximum rake angle.
▲ Low noise & smooth operation gives higher efficiency of operator.
▲ Less power consumption.
▲ Better safety for operator and machine.
▲ Front sheet support.
▲ Squaring arm with steel rule for front gauging.
▲ Hardened Transfer rollers + transfer balls mounted on table.
▲ Inner hold down cylinders.
▲ Cutting area illuminated for clear view of blades.
▲ Foot pedal with emergency stop
▲ Strokes can be controlled according different shearing length
▲ Four edge Cr12MoV Blade suitable to MS & SS.
▲ Multi-steps automatic back gauge program.
▲ Back gauge NC controlled
▲ Hardened & ground ball screw with linear motion bearings.
▲ Stroke counting on screen.
▲ Fast production on smaller jobs.
E21S NC controller
Back gauge
hydraulic system
hold down
4-cutting edges blade
hydraulic cylinder
.....
- 步骤1通过搜索关键词找到您感兴趣的产品
- 步骤2请点击 "查询 "或 "请求会面 "按钮联系供应商，否则，您也可以咨询我们的进口顾问。
- 步骤3确认您的电子邮件后，得到供应商的回复，或我们的贸易经理会尽快与您联系。
- 步骤4与中国供应商建立无语言障碍的会议
