Horizontal single/dual/ triple layer taping machine
Usage
Applied for high frequency data cable ( such a HDMI, DP, USB3.0,ATA, SATA, SAS), parallel cable(SFP,QSFP) and flat high frequency cable with single/double/tripe layer continuous central taping.
Characteristics
1. Adopted magnetic powder clutch and automatic tension trace device, taping tension keep constant from start to end. Don’t use any artificial adjustment.
2. PLC controlled, setting overlap rate on touched screen, taping point is steady while it’s normal work or accelerating and decelerating.
3. Take-up traversing is adopted shaft-traversing type structure, traversing distance and traversing width can be set arbitrary.
4. Smallest angle designed for wire traverse for ensuring the taping pitch won’t be damaged.
5. Full-automatic computer software control the whole taping line and computer online record and monitor all technical parameters
Technical parameters:
Model | 180 | 250 | 500 |
Inlet wire (mm) | AWG26-AWG36 | AWG22-AWG28 | 0-Φ15 |
Tape material | Copper foil tape,Aluminum foil tape, cotton paper tape, transparent tape,Teflon tape, etc. | Copper/Aluminum foil tape, Mylar tape ,cotton paper tape, transparent tape, mica tape, Teflon tape, etc. |
(r/min) Taping RPM | 0-2500 | 0-2000 | 0-2000 |
Machine power | Servo motor | Speed motor or AC motor |
Heating box | Heating by Infrared or light wave , Temperature : 40-800°C |
Power Pay off | Both use traverse packs and pad packs ,Tape size :Φ250(Φ75)*(4-10) |
Pay off bobbin | φ200-φ500 | φ200-φ630 |
Take up bobbin | φ300-φ500 | Φ400-φ630 |