First, general:
The GZG Series inertial vibration feeder is widely used in mining, metallurgy, coal, construction materials, electricity, road, light industry, chemical industry and other sectors. It is used to send massive, granular and powdered material to accepted device from the storage hopper or funnel continuously or quantitatively, Such as send to the crusher, sieve machinery, belt transport machinery, packaging machine,etc. such as mechanical or feedstock.
The GZG Series inertial vibration feeder is a kind of feeder with advanced economic indicators, compares with other feeders, it has the following characteristics:
1, small volume, light weigh, simplified and compacted structure.
2, convenient installment and maintanence, low operation cost.
3, low noise, high efficiency is, large feeding capacity.
4, This equipment carries on works under the ultra resonance condition with stable oscillation amplitude, reliable operation, it also has strong adaptability to different kinds of materials.
5, This equipment can be equiped with reverse control box, which can make the feeder to shut down rapidly in a short time, at the same time, it has the function of over-current, over-voltage, open-phase protection.
6, we can meet the customers’ requirements to increase the speed of feed ing, remote control, non-class frequent velocity modulation.
Three, installation and debugging:
1, the installation:
(1) the inertial vibration feeder recommend to carry on the installation under 10 ° dump, the maximum dump can be increased to 15 °, this is decided according to the material size.
(2) after the installation, the feeder should have not smaller than 20mm of move clearance so that the feeder is completely in free state.
(3) after the installation, the horizontal side of the feeder shall be level so as to avoid side displacement when feeding material.
(4) the wiring shall carry on according to the electrical schematics diagram and have grounding protection.