EPS压碎热熔回收机

Specification

Machine Details

EPS hot melting machine can process multiple materials such as EPS EPP EPE XPS PUR EVA into small hot melted blocks. As it is small capacity one, the machine is in lower price, easy to move and machine is in a small size, especially used in super market, schools, hospitals, small-sized warehouse, retail stores, and seafood markets.
Introduction for the HM 400 hot melting machinery
This is our smallest machine, which is in small size, low noise, easy to control, also very convenient to maintain.
This machine separate into three parts,
1,Hopper
2,Crusher parts
3,Extruder
We make a special hopper which can prevent the material from coming out of the crusher tank when the machine is working. Also the hopper is not high, it is easy for the people to feed the material inside.
The crusher tank is redesigned by our engineer with more efficiency blades, bigger crusher tank. 9 blades weld on one shaft, which is drive by the chain. The blade type is like the maneuver dart, high efficiency and low noise. All the blades are in a special angle between each other, this design can press the mater down into the screw barrel to increase the capacity.
After the crusher, the material will fall down into the barrel in small pieces ,then the material will be extruded by the screw.
At the head of the barrel, there are two ceramic heaters to melt the material.
When the material comes out from the mould, it will fall down to a steel cube box with we will offer. Then you will get a cubic block of EPS, the density of the block can reach 500-600kg per cubic meter. One container can load more than 20 tons material.
This small machine is used for the supermarket, seafood market, hotels and casino. The customer buy the machine, and put the machine in different place and then the customer can collect the material in different place, then sell the material.