pe/pp pipe production line
pe/pp pipe producing machine
Main Introduction
PE pipe extrusion machine/PE pipe making machine/HDPE machine is mainly used for producing pipe of waster supply and drainage in the field of agriculture and sonstruction cable etc. This machine consists of vacuum calibration tank, haul off unit. Cutting unit, stacker etc. The single screw extruder and haul off unit apply famous A/C frequency conversion speed regulation device, both vacuum pup and driving motor apply famous brand. The haul-off unit includes two-claw type, three-claw type, four-claw type, six claw type, eight-claw type, ten-claw type, twelve-claw type etc. Dust free cutting machine, saw blade cutting machine or planetary cutting machine can be applied, the property of machine group is reliable. The production efficiency is high with special device, It can produce inner wall spiral pipe, inner wall hollow pipe, and core layer foam pipe. It can also produce PP, PE, ABS, PPR, PEX, Silicon core pipe etc. The planetary cutting machine is controlled automatically with computer, it has such asvantages of simple operation, reliable performance etc. It has reached international advanced level.
Flow chart of PE pipe extrusion machine
PE granules Raw material + additive → vacuum feeding machine → hopper dryer → single screw extruder→ color band extruder → mould and calibrator → vacuum calibration machine → cooling tank→ haul-off machine → cutting machine → stacker
Main Machine Parameter
1. Good Quality Single Screw Extruder Machine
Main parameter
1. Main motor: Siemens AC Motor
2. Inverter: ABB Brand
3. Driving system : high torque, low noise, hard gear tooth face dedicated extruder gear box.
4. Screw and Barrel: 38CrMoAlA material with Nitrogen Treatment
5. Temperature Controller: Omron/RKC Japanese Brand
6. Other electrical components: Schneider Brand
7. Emergency shut down & safety function: Over current protective of motor + Over pressure protective of screw
2. High quality Extrusion Mould
Pipe diameter and Pressure: According to Customer Choice
Mould material :40Cr, superior quality Mould steel
Material of the calibrator: Brass
We can do double cavities mould for the small diameter maximum 63mm
3. Vacuum Calibration and Cooling tank
Calibrate the outer diameter and cool HDPE/PP pipe
automatic water level control and water temperature control
electric cabinet with water-proof protection
forceful concentrated spraying water cooling with good cooling effect
vacuum pump and water pump adopts good product with durable steady working quality.
4. Water Spraying Cooling Tank
Stainless steel, SUS304 material water spraying tank for cooling the HDPE/PPR pipe
Length is adjustable based on pipe diameter and production speed
Height can be adjustable
With water collection system for recycling use.
5. Haul off machine
Draw HDPE pipe forward stably, the speed is synchronized with extruder speed Speed Adjusting Mode: frequency conversion adjustable Clamping Mode: Pneumatically Drive Hauling Mode: Up-down Hauling by Special Rubber Block
Servo moto is an optional choice.
6. Cutting Machine
Good quality Dust free cutting machine
For pipe diameter less than 250mm, we can choose this kind of cutting machine, no dust, no noise.