Disposable No Woven EN149 Face Mask FFP2 Particulate Respirators

1.Applicable Standards

Technical specification： Technical specification to satisfy Annex II of the PPE Regulation (EU) 2016/425. BSI’s PPE for Healthcare Professionals 2020/403 – RPE Technical Specification  

2.Porduct List

REF:N9501F

Specification:11cm*16cm

packaging:20pcs /PE bag/ box, 30boxes / cubic bag / carton.

PS:One box adding with 40pcs of adjustable buckles and a wire; One carton adding with an instruction for use.

3.Product material composition  

4.Packaging material composition  

5.Main performance test  

6.Intended Use:
The Particulate Respirator is intended to cover the nose and mouth of the wearer to help reduce wearer
exposure to pathogenic biological airborne particulates during public health medical emergencies, such as
influenza pandemic and also protects the wearer from splash and spray of body fluids.
Warning:
1. Select the respirator type and determine the suitability of the respirator according to the intended use.
2. The respirator shall be abandoned when it is broken, becomes difficult to breathe, or polluted by body fluids.
3. This respirator is disposable, do not reuse or use for more than one shift.
4. Check the respirator before use. Make sure there are no broken earloops, no holes or other damages on the respirator. If any damage detected, please do not use and replace with a new one immediately.
5. The effectiveness will be reduced if facial hair or beard passes under the face seal.
6. The respirator should only be used in intended environment. Failure to follow the instruction may causeharm to health or reduce the  .
7. The respirator cannot provide intended protection if the mask is not correctly donned or is damaged.
8. Never alter or modify this respirator in any way.
9 This respirator does not supply oxygen. Use only in adequately ventilated areas containing sufficient oxygen to support life.
10. The respirator has a shelf-life of 3 years. After the expiry date the respirator must no longer be used.

Storage:
The product should be stored in an environment with suitable temperature and ventilation, protection from
direct light and moisture