1. Push and pull window advantages
Push and pull window does not occupy indoor and outdoor space, can control the open area at will, and it is easy to operate, and it is suitable for windowsill. Folding open doors and windows are suitable for large area of space. When opening and closing, doors and windows slide along the track, and the operation is light.
2, What is the difference between the upper and lower sliding windows and the open windows
The aluminum alloy doors and windows are classified according to their opening modes. At present, the most popular and practical window types in the market need to be pushed and pulled and flat. Flat window refers to the door and window which is installed on the side of the door and window which is closed with hinge to open inward or outward; push and pull door and window mainly refers to the window sash which is pushed vertically and horizontally to the left and right. Push pull and flat opening have their own advantages in the case of using the same glass and accessories.
The difference between the flat window and push-pull window is mainly in the collocation with the overall style of the building. Because of its flexibility in dividing the window, the flat window can make the facade effect of any line. For the large divided floor window, the opening fan only accounts for a small part of the whole window, so it is more suitable for the high-grade buildings with strict overall effect requirements, which conforms to the requirements of the overall effect of the building The architecture that architects pursue is large division, spacious and bright, good penetration effect and smooth appearance. The sliding window can only be pushed horizontally because of its opening position, so it is difficult to match the fixed glass with large divisions. Generally, it is suitable for the opening workshop with clear vertical lines or rural family buildings. In the three performance of doors and windows (wind pressure resistance, water tightness, air tightness), flat windows are generally better than push-pull windows.
In the process of using the push and pull window, there are disadvantages and advantages, but the relative advantages are larger than the disadvantages, so the use range is relatively wide. Generally, windows must have wind pressure resistance, that is to say, they can resist the general wind, and there is a certain degree of tightness. Otherwise, when it rains outside, it will rain in. Another is that the windows should be air tight, and the indoor temperature can be protected or the insulation effect can be achieved when it is needed. Push and pull windows are similar to other price windows, and push and pull windows are easy to use, so the market scope is much more than other windows.
Product Details:
Name/Model: | Anodized Aluminium Sliding Windows Vertical Clear Tempered Glass 8mm Thickness |
Profiles: | 6063-T5 high quality aluminium extrusion profiles |
Glass Choice: | Low-e; relective;Frosted; tinted; clear tempered glazing |
Glass Choice: | 5mm; 6mm,12mm single tempered glazing |
5+12A+5mm; 5+27A+5mm; 6+12A+6mm double glass |
5+6A+5+6A+5mm triple glass |
5+0.76+5mm;6+2.28+6mm Laminated |
other glass type you need |
Color: | matt black;white;ultra silver;clear anodized;nature clean aluminium |
Any color available |
Customized (matt black;white;ultra silver;clear anodized;nature clean aluminium) |
white or other color |
Hardware : | China Top brand: MACO |
Frame Surface Finish: | Powder coated meet AS 3715; Electrophoresis; flucarbon; Anodizing; |
Flyscreen: | Stainless steel security mesh; Aluminium security mesh; Fiberglass flys |
Guarantee : | 20 Years |
Security: | Crimsafe mesh ; Grille available |
Application: | Building(office/hotel/apartment) |
Advantages:
Because of the hinge, the window can open the gap about 10 cm intelligently. People can not come in from the outside, which is very safe for the residential residents;
The space occupied by the window opening fan in this way is small, which is very suitable for the places with limited installation positions such as kitchen and toilet.
Corporate Introduction:
KLUK Aluminum Windows and Doors System Co.,Ltd is high-end brands growth in Guangdong Yonglong Aluminum.Guangdong Yonglong Aluminum Co.,Ltd is located in Sanshui District,Foshan City,which was established in 1997.Yonglong is a large comprehensive profile enterprise with research,development,manufacture and sales of aluminum alloy profiles.
After years of development and precipitation, the group's business is mainly divided into four majors:'HONG YING' aluminum brand,'KLUK' high-end aluminum windows and doors system brand,building aluminum formwork and industrial aluminum profiles.We have passed ISO9001:2015 quality management system certification,ISO14001:2015 environmental management system certification.With abundant comprehensive strength and high quality service,the brand HONG YING has been well sold all over the country and exported to many countries and regions including South Asia,Europe,South America and so on.
KLUK is a systematic aluminum door and window brand integrating design and development of high-end aluminum alloy doors and windows, mold opening and production of profiles, formulation of processing technology standards, construction guidance, marketing and brand promotion services. The company introduces the world's top automatic production equipment, advanced surface treatment technology and high-precision inspection and testing equipment to realize informatization, standardization and standardization from manufacturing to process standard formulation and implementation, from sales service to order management, so as to comprehensively improve the efficiency of customer service, improve product delivery time and realize the optimization and integration of enterprise resources.
Corporate Advantages:
1.24 years' experience and advanced equipment
2.Customize: We can manufacture according to your size and shape of such aluminum profile;
3.Strong production capacity - 28 extrusion lines, 50,000TONS/Year
4.One Stop Service Specialized in mould, extrusion, anodizing, powder coating, wood grain and Processing;
5.Shortest Delivery , competitive prices and excellent service