1600 series intelligent electropn-eumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.
The product is easy to operate. It can easily be operated via the keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signals.
Technical data | |
Material | PC、PA6-GF30, Stainless Steel, SI |
Power supply | 24V DC ±10% |
Set-point signal | 0/4-20mA or 0-5/10 V |
Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | neutral gases, air DIN ISO 8573-1 Class 5 (<10mg/m3) Class 5 (<25mg/m3) |
Ambient temperature | 0-55°C |
Pneumatic connection | Plug-in hose connector G1/4(internal Φ6mm) |
Electrical connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
Supply pressure | 3~7 bar, specific values depending on the actuator |
Air flow rate | 18 l/min, 55 l/min(only single-acting) |
Stroke control range | Line 5-50mm Angle 90° |
Installation | As required, Preferably with actuator in upright position,Screw M26×1.5 |
Protection class | IP65 |
Power consumption | <5W |