face shield protective mask

Face shield protective mask
[Production filing certificate No.]
Jiangsu Suzhou food&drug administration and equipment production certificate No.20208008
Filing certificate No./Product technical requirement No.]
Jiangsu Suzhou equipment certificate No.20200250
[Scope of use] Used in medical institutions for protection during inspection and treatment,blocking
body fluids, blood splashes or splashes.
[Model No.] a.LYM001
b.Basic parameters
Basic dimension: (320mm土3mm) x (220mm土3mm) Thickness; (0.30士0.005mm)
[Main technical parameters]
a. The rubber band of the medical isolation mask should be elastic and free from flling off when worn:;
b. The breaking strength at the connection between the fixing device and the mask should not be less
than 15 N;
C. The joint of medical isolation mask should be firm. The horizontal plane is subjected to a tensile force
of 12N,Withstand 10N tensile force in vertical direction for 30s, they should not fall off.
[Instructions for use]
Avoid contact with sharp objects during use to avoid scratches and affect the protection effect.
Keep it properly after use.
[Storage conditions]
Store in a room with relative humidity s 80%,temperature - 10°C s 40。C, and no corrosive gas and good
ventilation. It shall not be directly exposed to the sun, and shall be placed away from the heat source, and
shall not contact with paint,acid and alkali,etc. which are harmful to the product.
[Warning]
a.Storage under the specified conditions, 3years.
b.When cleaning the product, use a soft cloth moistened with alcohol or neutral detergent to wipe the
surface dirt of the product and use or store it after the surface is naturally dry.
If necessary. it can be sterilized with redox gas Can not be sterilized by high pressure and high
temperature.
c.Use should be in accordance with the relevant regulations, after use should be properly kept.
d.It is forbidden to use after being found broken and cracked.
[Date of Instructions] March 2020.