Note: the above high-voltage lamp belt can be customized according to the number of lamp beads per meter, wire rod, meters per coil, etc.; the low-voltage lamp belt can be customized with drip / sleeve / pouring glue.
1. It is suggested that the storage condition of unpacked money is - 25 ° and + 80 ° and the ambient temperature is - 10 ° and + 60 ° respectively;
2. When the SMD light strip is rolled and not unpacked, do not turn on the power for a long time, so as to avoid fire caused by heating and burning of the light belt;
3. During installation, the surface of lamp body shall not be covered with objects that are not easy to heat dissipation, so as to avoid affecting heat dissipation and reducing lamp body life;
4. Do not pull or twist the light belt vigorously during installation, so as to avoid damaging the electrified wire of lamp tube and causing short circuit;
5. During the installation, it is necessary to confirm whether the input voltage is consistent with the product voltage, so as to avoid burning the lamp belt by connecting the wrong voltage;
6. During the shearing process of the product, it is necessary to ensure whether the cutting is carried out at the cutting site, and at the same time, the waterproof and leakage treatment should be done at the shearing position;
7. Due to the pressure drop, please do not use the maximum series connection length specified in the parameter table when connecting the lamp strips in series;
8. Static electricity has certain destructiveness to the product, so it is necessary to distribute electrostatic bracelet or electrostatic gloves during installation or use.