Gu 'an Qianlu Filtration Technology Co., Ltd. produces natural gas filter element/gas filter element. The filter element is suitable for gas liquid and solid liquid separation of natural gas, artificial gas and other non-corrosive gases. It is the separation and purification equipment components of natural gas gathering pipeline and gas transmission pipeline on the gas collection station, pressure station, sub-delivery station, pigging station, terminal station and various application fields. It can effectively filter the dirt in the pipeline and the peeling debris of the pipe wall, so as to ensure the safe operation of the gas transmission and gas equipment, and meet the quality requirements of the pipeline transportation and users.
In the process of gas pipeline transportation, air source impurities and pipeline mechanical impurities will affect the gas transmission quality and damage some metering and pressure regulation equipment on the pipeline. Therefore, gas filtration equipment should be installed before each receiving and sending station or important equipment to ensure the safety of downstream equipment (sometimes through multistage filtration). The filter element is the main component of these filtration equipment, so the selection of the filter element directly affects the effect of filtration, according to the unique properties of gas, the selection of stainless steel metal mesh as the main filter material, through the wave structure to increase the filter area of the filter element, while increasing the amount of pollution. Sealing using high temperature and low temperature asbestos pad for sealing material filter element in the process of use according to the change of pressure difference timely cleaning or replacement.
Introduction to sintered natural gas filter element
The main material of the product is polyester fiber material, glass fiber sintered tube filtration precision 0.1-100 micron, strong contaminant capacity.
The service life of the filter element is greatly affected by the cleanliness of the filter medium, and the maintenance of the filter element is also very important. When the pressure difference between the two ends of the filter exceeds a certain value, the filter element needs to be cleaned or replaced. Cleaning should be carried out in a clean environment to prevent secondary pollution. Available high pressure blowback cleaning, also available water backwash but to dry the filter element in time to prevent rust bearing skeleton. Before installing the filter element again, check the position and wear of the sealing ring. If there is any problem, replace it in time.