Static Etched Window Film

REGULAR SPECIFICATIONS Main Material:PVC (0.18mm±0.01mm) Reverse Material:PET(0.04mm) or Release Paper (150gsm) Width:30cm;40cm;50cm;60cm;70cm;80cm;90cm;100cm;120cm. APPLICATION Bathroom Front Door Living Room Office Warehouse Glass Curtain Etc. INSTRUCTIONS 1.Clean all residue,dirt,and fingerprints from window. 2.Measure window dimensions. 3.Cut film with sharp scissors.Oversize the film up to 1/2 inch on each side. 4.Separate window film from back paper. 5.Wet window glass with water/soapy water with solution before applying film to window. 6.Stick one corner first then apply.Slide film into position on window.Film should stick on glass. 7.Use a squeegee/card to squeegee out air bubble and water to film edge. 8.Trim any excess film using razor with metal rular against window's edge. 9.Repeat squeegee process and make sure the entire film is completely attached to the glass surface. 10.towel away water from edges. This is to prevent water from seeping back into the film. FEATURES * Provide privacy of your shower room and any windows in the home or office. * 100% adhesive free,you can rest assured knowing the film will never damage your windows or leave behind a sticky residue. * Apply the film to your window in just a few short minutes with the use of a small squeegee. * An inexpensive alternative to those costly frosted windowpanes and walk-in shower doors.Comes in a trendy geometric design that looks fabulous on windows. * UV Treatment avoid the yellowing caused by UV Rays. * Lots of designs for choose or can develop unique designs.