太阳能充电 195wh 54000mAh 便携式电站，带卡拉 OK HIFI 蓝牙和明亮功能便携式移动电源

Product Description:

1.The relevant characteristics of the F9 PLUS portable energy storage power supply are the basis for product design, production and inspection.

2.This design system is composed of ternary lithium or lithium iron phosphate battery protection board, DC charging circuit, MCU control circuit, inverter circuit and LCD screen.

3.Output 300W pure sine wave AC110V/50Hz (or AC220/60Hz), output DC12V/10A, USB QC3.0, TYPE-C PD18W.

4.It is suitable for camping, emergency communication, medical rescue, fire rescue and other fields.

5.The products are designed in strict accordance with the requirements of safety regulations and meet the requirements of safety standards.

6.DC input: 18V 2A (DC5525) or PD18W or Solar charging method.

7.AC output;DC 12V output;USB3.0 output;Type-C output.

8.LCD display battery usage status (battery capacity, charging process, full stop).

Summarize：1.Cost-effective 2.Karaoke HIFI 3.Bluetooth Connection 4.Bright 5.Portable 6.Support OEM/ODM

Protection function: short circuit protection, overload protection, over temperature protection, over voltage protection, over current protection, under voltage protection, etc.

Product instructions

1. charging input

Charging: (external 18V2A adapter connected to terminal 5521) through DC conversion output voltage 17V 2A to charge the battery pack, at the same time the digital tube lights up to display the charging status, flashing in the form of a marquee (1HZ flashing), always on after fully charged, unplug Turn off the power adapter, and the digital tube will go out after 10 seconds without any use!

Output

1.1 TYPE-C:5V3A 9V2A 12V1.5A (PD18W),

          USB1 : 5V3A 9V2A 12V1.5A (QC18W),inner orange

          USB2 : 5V3A 9V2A 12V1.5A (QC18W),inner orange

1.2 DC output 5525 port:12-16.8V 10A

1.3 Lighting: Long press the LED switch for 3S, the LED light is on, double-click the LED switch to light SOS, and then long press the LED switch for 3S, and the LED light is off.

2.1 Turn on the AC power switch, the digital display screen is on, and the AC seat outputs AC voltage 220V 300W.

3.1 Press and hold the multi-function switch for 3 seconds to turn it on, enter the Bluetooth mode, connect the mobile phone to the device to play music, the volume addition and subtraction correspond to the volume of the microphone, click to switch between the original singing/accompanying singing, and press and hold for 3 seconds to turn off

4.1 When the operation is abnormal, please immediately turn off the power output and unplug the plug.

5.1 After use, unplug and turn off the power.

6.1 When the battery power is too low, the product will enter low voltage protection and stop voltage output.

7.1 When using the AC output port, pay attention that the power of the equipment load cannot exceed the rated power of this product 300W

8.1 When the battery enters low voltage, please charge it in time!

9.1 After high-power discharge, to prevent the danger of high-temperature charging, please do not charge immediately, wait for the machine to be placed in a normal temperature environment, and then charge after cooling naturally!