The cut to length line is used to get flat sheets from steel coils after 7-8 working procedures.
The total line is CNC control.
After operator put coil onto the loading cart, the following procedures will finish automatically.
The touch screen in the controlling table will allow operator to input parameters required.
The total line is easy to operate.
Such a line normally containing below working procedures:
1.unloading cart (optional)
2. uncoiler
3. shoveling and pressing device
4. correcting facility
5. pinching
6. leveling (four high structure)
7. length fixing
8. shearing
9. stacking (optional)
10. electric control system
11. hydraulic control system
coil thickness | 0.8-2 mm |
---|---|
coil width | 300-1300 mm |
coil weight | 10 tons max |
line speed | 0-60 m/min |
flatness tolerance | ≤±0.5mm/m2(for board without defect) |
length tolerance | ≤±0.5mm/2000mm(for board without defect and without oil film) |
(1) What is your advantages?
A1: More than 20 years experience in manufacturing and R&D, we are professional and humanized .
A2: Since we are a manufacturer, not a trading company, we can provide good quality pre and after sales service on time.
A3: production efficiency: 3-4 line per month
(2) Do you have after sales support?
Yes, we have a 15 persons professional installation and testing team. And will provide service for you during the machine life time. Any problem, contact us freely and we will try to solve asap.
(3) How to visit your company?
Our factory is located in Haian city, near Shanghai. From Shanghai to Haian, there are many schedules of direct bus. It will cost only 3 hours by bus.