Heat Pipe Solar Collector With High Efficiency
Heat Pipe Solar Collector
Description;
Heat pipe solar collector working theory
Basic principle:
Vacuum tube absorb solar energy and transfer to heat pipe via aluminum fin, heat pipe is heated and working liquid vaporize and rise to the top heat pipe condenser (condenser is inserted into the manifold port inside the solar collector manifold), when the heat pipe condenser meet cold water flow inside the manifold port, the working liquid will cool down and fluidify return to the bottom of heat pipe, so once and once again repeat this process, so finally cold water(glycol) inside the manifold port will be heated.
Solar Collector Specifications
Manifold Casing Material :2.0mm Aluminum Alloy
Frame Material: 2.5mm Aluminum alloy / Stainless Steel
Header Pipe Material: 99.93% pure copper , Diameter 14mm
Insulation : Compressed Rock Wool
Rubber Seals and Rings : HTV grade silicone rubber
Flat roof installation angle : 15o -----75o
Maximum Operating Pressure: 10 bars
Optimal flow rate : 0.1L/min/tube
c
- 步骤1通过搜索关键词找到您感兴趣的产品
- 步骤2请点击 "查询 "或 "请求会面 "按钮联系供应商，否则，您也可以咨询我们的进口顾问。
- 步骤3确认您的电子邮件后，得到供应商的回复，或我们的贸易经理会尽快与您联系。
- 步骤4与中国供应商建立无语言障碍的会议
