GZHUAYAN Eone series injection molding system is specialized for small batch preform manufacturing. On the basis of economical efficiency and utility, cycle time, mechanical strength, product quality and operating cost of the machine are optimized. It provides high quality preforms with low cost to customers. This model is of high flexibility and can meet the needs of different production.
Compared with ordinary injection molding machines, the operating cost advantages of electric Eone are mainly reflected as follows:
1. The fully automatic system is highly intelligent. One machine is equivalent to the output of two ordinary machines, and the labor cost is only half of that of ordinary injection molding machines;
2. Low energy consumption for production, more than 35% energy saving than ordinary servo injection molding machines, more than 50% energy saving than traditional non-servo injection molding machines, and only 0.4KWH per kilogram of preform is produced;
3. The finished product rate is high. Ordinary injection molding machines have a reject rate of 1.5%, while the Eone preform injection system has a product pass rate of 99.7%;
4. Eone has excellent plasticizing effect and excellent color mixing performance, and is a good choice for producing high-quality preforms.
The production cost of each preform produced by the Econ series is much lower than that of ordinary machines. Taking the production of 15 grams of water embryos with 48 cavities as an example, the application of Econ (48/72) cavity preform injection system is compared with that of ordinary machines. The production cost can be saved by 0.009 yuan. Calculated on the basis that 143 million preforms can be produced in 320 days a year, it can generate at least 1.28 million yuan in additional income for customers every year.