Listen-Acoustic introduces its new Modular Column Array sound systems E3 series.
This series, with finely worked design, connected by quick-insert. It is easy to install and to take away thanks to their stacking system.
Moreover,the whole amplification process happens within 10'' powered subwoofer , to make things easier, while connectors, the amplification and DSP module are precise and user-friendly. Also you could add extension subwoofer which is another active version without DSP for more basses.
Model No. | E3-M/E3-MT | E3-10D | E3-10DM |
Type | Active full range column speaker |
10'' active bass reflex | |
Frequency Response (-6dB) | 200 Hz - 21 kHz | 47 Hz - 200 Hz | |
Max. SPL (1m, free space) | 109 dB | 117 dB | |
Power Output (RMS) | 50W | 400W | |
Impedance | 4 Ohms | 4 Ohms | |
Transducer MF | 4 * 2.75", neodymium magnet, 1" voice coil |
/ | |
Transducer LF | / | 10" subwoofer, 2.5" voice coil |
|
Amplifier | Class-D amplifier | ||
DSP Module | / | LA DSP-100, 96 kHz, 24-bit DSP processor with preset modes:Speech, DJ, Live |
No DSP |
Protection | / | Short circuit overheating, over-current |
Short circuit overheating, over-current |
Controls | / | Power On / Off switch, satellite level, subwoofer level, Line/Mic switch, Bluetooth On / Off switch, TWS switch reset switch, DSP modes switch |
Power On / Off switch, main level |
Indicators | / | Power, signal, limit, bluetooth, reset |
Power, signal, limit |
Audio Input / Output | Top and bottom 4-pins-quick-insert with 4 core ( 2Core 24V / 2Core Signal +/- ) |
Left / Right female and male XLR input 1 * XLR output 1* 4-pins-quick-insert |
1 * XLR input, 1 * XLR output |
Power Input / Output | 4-pins-quick-insert | Powercon | |
Power Supply | / | 90~140V 50/60HZ 200~250V 50/60HZ |
|
Enclosure | PP Plastic | 15mm MDF with regular raindrop painting |
|
Grille | 1.0mm thickness metal grille without acoustic fabric |
1.0mm thickness metal grille without acoustic fabric |
N º de Modelo. | E3-M / E3-MT | E3-10D | E3-10DM |
Tipo | Altavoz activo de columna de rango completo | Reflejo de graves activo de 10 '' | |
Respuesta de frecuencia (-6dB) | 200 Hz - 21 kHz | 47 Hz - 200 Hz | |
Max. SPL (1 m, espacio libre) | 109 dB | 117 dB | |
Potencia de salida (RMS) | 50W | 400W | |
Impedancia | 4 ohmios | 4 ohmios | |
Transductor MF | 4 * 2.75 ", imán de neodimio, imán de neodimio, bobina móvil de 1" | / | |
Transductor LF | / | Subwoofer de 10 ", bobina móvil de 2,5" | |
Amplificador | Amplificador de clase D | ||
Módulo DSP | / | LA DSP-100, 96 kHz,procesador DSP de 24 bits con modos predeterminados : voz, DJ, en vivo | Sin DSP |
Proteccion | / | Cortocircuito sobrecalentamiento, sobrecarga de corriente | Cortocircuito sobrecalentamiento,sobrecarga de corriente |
Control S | / | Interruptor de encendido / apagado,nivel de satélite , nivel de subwoofer, interruptor de línea / micrófono, interruptor de encendido / apagado de Bluetooth,interruptor de reinicio del interruptor TWS , interruptor de modos DSP | Interruptor de encendido / apagado,nivel principal |
Indicadores | / | Potencia, señal, límite, bluetooth, reinicio | Potencia, señal, límite |
Entrada / salida de audio | Inserto rápido de 4 pines superior e inferior con 4 núcleos ( 2 núcleos 24 V / 2 núcleos de señal +/-) | Entrada XLR izquierda / derecha hembra y macho 1 * Salida XLR 1 * Inserción rápida de 4 pines | 1 * entrada XLR, |
Entrada / salida de energía | Inserción rápida de 4 pines | Powercon | |
Fuente de alimentación | / | 90 ~ 140V 50 / 60HZ 200 ~ 250V 50 / 60HZ | |
Recinto | Plástico PP | MDF de 15 mm con | |
pintura de gotas de lluvia regular | |||
Reja | Rejilla metálica de 1,0 mm de sin tejido acústicoespesor | Rejilla metálica de 1,0 mm de espesor sin tejido acústico |