JRR waste heat regenerative adsorption dryer is a new type dryer designed on the basis of the adsorption dryer! The most important characteristic of this dryer is energy-saving because the waste heat regenerative dryer heats the adsorbent with heat energy generated when air is compressed instead of heat energy from the outside.
Main technical parameters:
Processed air quantity: 1-1000Nm3/min
Working pressure: 0.2-6.0Mpa
Intake air temperature: 110°C -150°C
Air rate of regeneration: ≤1%
Dew point of air: -50°C ~-70°C
Pressure drop: 0.03Mpa
Working environment: indoor
Waste heat regenerative dryer (also named compressed heat regenerative dryer) is developed on the basis of micro-heat dryer, which shows the characteristics of the micro-heat dryer and own advantages. The dryer makes use of high-temperature heat from II grade exhaust of the compressor as thermal regeneration of adsorbent, and will not consume compressed air during heating and regeneration except for cold blowing. The purge air amount is lower than that of micro-heat dryer; the dryer consumes a small amount of air (average between 1 and 2%) during regeneration, saves energy by about 65% energy, and is an energy-saving dryer.