1. ES72LP/ES73LP/ES75LP/ES72L/ES73L/ES75L:
Features: 1' Top performing square-corner chisel cutters. 2' Bumper drive links reduce kick back. 3' Recommended for saws of 50cc to 100cc and bars from 13"to24" (33 to 60cm)
2. ES72R/ES73R/ES75R :
Features: 1’Riping chain and standard sequence. 2'Recommended for a wide range of chainsaws up to 100cc abd guide bars up to 36"(90cm)
3. EES72YO/ES73YO/ES72YL/ES73YL:
Features:1'Excellent perfomance in dusty and dirty conditions. 2.The oil holes in all drive links help carry oil around the full length of the guide bar's groove.3.Recommended for a wide range of chainsaws up to 100cc and guide bars up to 36"(90cm)
4. ES720P/ES730P/ES750P
Features: 1.Round-cornered semi-chisel cutters work fast and more tolerant of sharpening errors (typically) than most cutter types . 3. Recommended for saws of 50cc to100cc and bars from 13"to24"(33 to 60cm)
5. ES73MO
Features: 1.Excellent performance in dusty and dirty conditions. 2.The oil holes in all drive links help carry oli around the full length of the guide bar's groove. 3.The dot in which chain oil can collect are stamped into both ends of the drive links.This allows better distribution of the oil over the sliding surfaces of the guide bar and improves lubrciation by 10%. The serviece life of the chains is thus increased. 4.Recommended for a wide range of chainsaws up to 100cc and guide bars up to 36"(90cm)